올해 NAMM 에서 발표한 RME M-1610 Pro converter 를 이제 공식 출시 한다는 소식입니다.
RME 측에서는 차세대 high-end AD/DA converter 라는 표현을 써서 홍보에 나서고 있습니다.
이 제품에는 SteadyClock FS 기술 (Reference class Digital Clocking), ADAT, MADI 그리고 AVB I/O 등을 다양하게 지원한다고 합니다.
이 제품이 기존 제품보다 더 뛰어난 AD / DA 컨버팅 능력을 가지고 있을지 귀추가 주목되는 제품입니다.
판매 가격은 $2,990 입니다.
RME M-1610 Pro converter
M-1610은 1U 사이즈의 16채널 컨버터입니다.
16개의 아날로그 밸런스 입력, 8개의 아날로그 밸런스 출력, 동축 I/O 당 128개의 MADI 채널 및 32개의 ADAT 출력 채널을 제공합니다.
2개의 전원 공급 장치 입력과 함께 최대 8개의 AVB 스트림과 최대 64개의 오디오 채널을 위한 2개의 Gigabit Ethernet로 리던던시가 용이합니다.
전면 패널에는 풀 컬러 스크린, 보조 헤드폰 출력 및 3가지 라인 레벨(+13, +19, + 24dB)을 위한 스위치가 있습니다.
기본 스펙
- 16 x Analog In (25-pin D-sub, up to +24 dBu, 6x TRS, fully symmetrical design)
- 8 x Analog Out (25-pin D-sub, up to +24 dBu, fully symmetrical design)
- 16-channel AD converter, 8-channel DA converter, fully symmetrical
- Switchable sensitivity per channel +13/+19/+24 dBu
- DC-coupled Outputs
- 1x Stereo Phones out with direct monitoring of all digital and analog inputs
- 4x ADAT Outputs
- Word Clock I/O (BNC)
- 1 x MADI I/O coaxial
- Easy single- or multi mode MADI integration via SFP module
- MADI Auto-Input - seamless redundancy
- MADI-AVB conversion
- 2 x RJ45 1 GigE AVB, eight streams (128 Channels) with 1-8/12/16 Ch., fully redundant
- 2 x monitored fully redundant internal PSUs
- 19” enclosure 1 height unit
- SteadyClock FS - ultra-low jitter digital clock technology
- SyncCheck® and ICC® - detects when a clock source is not in sync and falls back to other available signals
- 2” full color display with control knob for device control
- Internal routing of all 272x298 channels
- Remote control via HTTP, JSON, IEEE 1722.1 AVDECC
- USB 2.0 (for remote control and firmware updates)
연결단자 :
- 6 x Balanced Line-Level TRS Inputs
- 2 x Balanced Line-Level TRS Outputs
- 16 x Balanced Line-Level D-Sub Inputs
- 8 x Balanced Line-Level D-Sub Outputs
- 4 x ADAT I/O
- 1 x MADI Coaxial I/O (BNC)
- 1 x MADI Optical I/O
- 2 x AVB Audio Networking Connections
- 1 x USB
- 1 x Headphone Output
- Remote Control With Web Interface
- Dual / Redundant Power Supplies
추가 옵션 : RME AVB Tool 의 MADI I/O 를 확장할 수 있는 RME MADI SFP Module 옵션 추가 가능
참고링크
비밀번호 : 확인 취소
회원에게만 댓글 작성 권한이 있습니다.